bussmann JKS限流快速熔斷器
聲明：您必須遵守我們的協議，如果您下載了該資源行為將被視為對《電天下賬號管理規范》全部內容的認可，本網站資源來自原創，僅供用于學習和交流，請勿用于商業用途。如有侵權、不妥之處，請舉報本資源，我們將及時審核處理！
bussmann JKS限流快速熔斷器
bussmann JKS限流快速熔斷器
文本預覽
Bussmann
?
Limitron? Quick-Acting Fuses JKS
Class J – 600 Volt 1-60A
Dimensional Data General Information:
? Single-element, current-limiting fuses provide superior short-
2.25"
(– 0.03) circuit protection.
.5" .81" (– 0.03) ? Protects low interrupting capacity circuit breakers. Limits the
short-circuit current to meet the interrupting capacity require-
ments of existing equipment.
? On older systems available short-circuit current may exceed
1A to 30A
the interrupting capacity of the circuit breakers, fuses can be
2.38"
(– 0.03) installed in series with existing equipment.
.63" 1.06" (– 0.03) ? Well suited for lighting and heating circuits and other non-
inductive loads.
? Provides component short-circuit protection in compliance with
NEC 110-10, where protection devices shall clear a fault with-
35A to 60A out “extensive damage” to the circuit components.
? High interrupting rating helps meet the requirements of future
system expansion and the increases in available utility short-
Catalog Symbol:JKS
circuit current.
Quick-Acting ? Fuses can be selectively coordinated with ease.
Current-Limiting
Ampere Rating: 1 to 60A
Voltage Rating: 600Vac (or less)*
Interrupting Rating:200,000A RMS Sym.
Agency Information:
Recommended fuseblocks/fuseholders for
UL Listed, Std. 248-8, Class J, Guide JDDZ, File E4273
Class J 600V fuses
CSA Certified, C22.2 No. 248.8, Class 1422-02, File 53787
See Data Sheets listed below
? Finger-safe fuseholders - 1152
Catalog Numbers
? Open fuseblocks - 1114
JKS-1 JKS-8 JKS-30
? Open pyramid fuseblocks - 1108
JKS-2 JKS-10 JKS-35
JKS-3 JKS-12 JKS-40
JKS-4 JKS-15 JKS-45
JKS-5 JKS-20 JKS-50
JKS-6 JKS-25 JKS-60
Carton Quantity and Weight
Carton Weight**
Amps Qty. Lbs. Kg.
1–30 10 0.95 0.430
35–60 10 1.175 0.532
*15-30A rated 200VDC, 31-60A rated 175VDC and 10 KAIC.
**Weight per carton.
CE logo denotes compliance with European Union Low Voltage Directive
(50-1000Vac, 75-1500Vdc). Refer to Data Sheet: 8002 or contact
Bussmann Application Engineering at 314-527-1270 for more information.
Form No. JKS 1-60
Page 1 of 2
10-2-02 SB02295 Data Sheet: 1026Bussmann
?
Limitron? Quick-Acting Fuses JKS
Class J – 600 Volt 1-60A
The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is
intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change
design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information con-
tained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
Form No. JKS 1-60
Page 2 of 2
Data Sheet: 1026
EREPMA
GNITAR
60
30
SPMA
NI
TNERRUC
HGUORHT-TEL
KAEP
SUOENATNATSNI
000,1 000,01 000,001 000,002
B 400,000
100,000
10,000
A
1,000
RMS SYMMETRICAL CURRENTS IN AMPERES
A–B=ASYMMETRICAL AVAILABLE PEAK (2.3 x SYMM RMS AMPS)
A03 A06 AMPERE RATING
300
100
10
1
.1
.01
RMS SYMMETRICAL CURRENT IN AMPERES
SDNOCES
NI
EMIT
04 001 000,1 000,01
Current Limitation Curves Time-Current Characteristic Curves–Average Melt
?
Limitron? Quick-Acting Fuses JKS
Class J – 600 Volt 1-60A
Dimensional Data General Information:
? Single-element, current-limiting fuses provide superior short-
2.25"
(– 0.03) circuit protection.
.5" .81" (– 0.03) ? Protects low interrupting capacity circuit breakers. Limits the
short-circuit current to meet the interrupting capacity require-
ments of existing equipment.
? On older systems available short-circuit current may exceed
1A to 30A
the interrupting capacity of the circuit breakers, fuses can be
2.38"
(– 0.03) installed in series with existing equipment.
.63" 1.06" (– 0.03) ? Well suited for lighting and heating circuits and other non-
inductive loads.
? Provides component short-circuit protection in compliance with
NEC 110-10, where protection devices shall clear a fault with-
35A to 60A out “extensive damage” to the circuit components.
? High interrupting rating helps meet the requirements of future
system expansion and the increases in available utility short-
Catalog Symbol:JKS
circuit current.
Quick-Acting ? Fuses can be selectively coordinated with ease.
Current-Limiting
Ampere Rating: 1 to 60A
Voltage Rating: 600Vac (or less)*
Interrupting Rating:200,000A RMS Sym.
Agency Information:
Recommended fuseblocks/fuseholders for
UL Listed, Std. 248-8, Class J, Guide JDDZ, File E4273
Class J 600V fuses
CSA Certified, C22.2 No. 248.8, Class 1422-02, File 53787
See Data Sheets listed below
? Finger-safe fuseholders - 1152
Catalog Numbers
? Open fuseblocks - 1114
JKS-1 JKS-8 JKS-30
? Open pyramid fuseblocks - 1108
JKS-2 JKS-10 JKS-35
JKS-3 JKS-12 JKS-40
JKS-4 JKS-15 JKS-45
JKS-5 JKS-20 JKS-50
JKS-6 JKS-25 JKS-60
Carton Quantity and Weight
Carton Weight**
Amps Qty. Lbs. Kg.
1–30 10 0.95 0.430
35–60 10 1.175 0.532
*15-30A rated 200VDC, 31-60A rated 175VDC and 10 KAIC.
**Weight per carton.
CE logo denotes compliance with European Union Low Voltage Directive
(50-1000Vac, 75-1500Vdc). Refer to Data Sheet: 8002 or contact
Bussmann Application Engineering at 314-527-1270 for more information.
Form No. JKS 1-60
Page 1 of 2
10-2-02 SB02295 Data Sheet: 1026Bussmann
?
Limitron? Quick-Acting Fuses JKS
Class J – 600 Volt 1-60A
The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is
intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change
design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information con-
tained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
Form No. JKS 1-60
Page 2 of 2
Data Sheet: 1026
EREPMA
GNITAR
60
30
SPMA
NI
TNERRUC
HGUORHT-TEL
KAEP
SUOENATNATSNI
000,1 000,01 000,001 000,002
B 400,000
100,000
10,000
A
1,000
RMS SYMMETRICAL CURRENTS IN AMPERES
A–B=ASYMMETRICAL AVAILABLE PEAK (2.3 x SYMM RMS AMPS)
A03 A06 AMPERE RATING
300
100
10
1
.1
.01
RMS SYMMETRICAL CURRENT IN AMPERES
SDNOCES
NI
EMIT
04 001 000,1 000,01
Current Limitation Curves Time-Current Characteristic Curves–Average Melt
AIGCBussmann JKS系列是一種專為電力電子應用設計的高效能限流快速熔斷器產品。該系列熔斷器的特點在于具有極快的分斷能力（即熔斷速度極快），能夠在電流異常或短路情況下迅速切斷電路，從而有效地保護電氣設備和系統免受過載和瞬態過電流的損害。
JKS系列熔斷器采用了獨特的限流技術，即使在高電感負載中也能提供穩定的、可調的熔斷特性，確保了系統的可靠運行和電源質量的維護。其結構緊湊，適用于各種環境條件下的安裝，廣泛應用于電機控制、不間斷電源（UPS）、太陽能逆變器、工業自動化以及電動汽車充電等領域。
值得注意的是，具體的技術參數、型號選擇和使用方法應參考Bussmann的產品手冊和規格說明，以確保正確和安全地選用和安裝此類熔斷器。
