TS118-4eng紅外溫度傳感器（英文）
聲明：您必須遵守我們的協議，如果您下載了該資源行為將被視為對《電天下賬號管理規范》全部內容的認可，本網站資源來自原創，僅供用于學習和交流，請勿用于商業用途。如有侵權、不妥之處，請舉報本資源，我們將及時審核處理！
TS118-4eng紅外溫度傳感器（英文）
TS118-4eng紅外溫度傳感器（英文）
文本預覽
Thermosensors
TS 118 - 3 / TS 118 - 4
THERMOPILES are used for non-contact surface temperature measuring.
Any object emits infrared radiation. The radiation power is increasing with growing surface
temperatures. Based on this relation, THERMOPILES measure the emitted power and determine the
object’s temperature precisely.
Function Principle
THERMOPILES are based on the Seebeck effect, which is used since a long time for conventional
thermocouples. The application of micromechanics and thin film technology allows the production of
miniaturized and cost effective sensor elements.
absorption area silizium-substraet
(hot junctions) SiNx-membrans (cold junctions)
A multitude of thermojunctions deposited on a silicon substrate is connected in series to form a
THERMOPILE. The hot junctions are thermally insulated from the cold junctions on the substrate by
etching a self-supporting extremely thin membrane. An absorbing layer on the hot junctions transforms
the incoming radiation into heat. A voltage proportional to the radiation is generated by the
thermoelectric effect. The sensors are delivered in TO05 packages. Different housings and filter types
can be selected to find an optimal solution for each application. Chips without housing are available as
well.
Specifications Filter
Parameter Symbol Unit Value Condition
Number of thermojunctions n 100
Material BiSb, NiCr
Active Area AA mm2 0.7 * 0.7
Chip Size AC mm2 2.0 * 2.0
Resistance of Thermopile R k? 50 ± 15 25 °C
TC of resistance TCR % / K -0.03 ± 0.02 +25...+75 °C
Sensitivity of sensor S V / W typical 80 25°C, 500 K, DC
TC of sensitivity TCS % / K -0.52 ± 0.08 +25...+75 °C
Specific detectivity D* cm*Hz1/2 / W 1.5 * 108 500 K, DC
Noise equivalent power NEP nW 0.46 500 K, 1 Hz
Time constant t63 ms 40 ± 10 500 K, 1 Hz
Operation temperature T °C -20 ... +100
Storage temperature T °C -40 ... +100
Reference Resistor
Resistance RNi ? 1000 ± 0.4% 0 °C
TC of resistance TCRNi ppm / K 6178 ± 1% 0 °C...100 °C
Function: R(T) = 1000? + 6,17*T*?, for detailled information see data sheet of reference resistor
HL-Planartechnik GmbH
Hauert 13, 44 227 Dortmund, Tel.: +49 (0) 231/97400, Fax.: +49 (0) 231/974020
Internet: http://www.hlplanar.com E-Mail: service@hlplanar.deThermosensors
TS 118 - 3 / TS 118 - 4
C onnecting Diagram TS118-3 TS118-4
bottom view
O utput Voltage versus Object Temperature
12,0
Conditions:
10,0
Distance from Thermopile to Black
8,0 Body is 5 cm, emissivity equals 1,
surrounding temperature is 25°C
6,0
4,0
Tables with emissitvity of different
2,0 materials and surface are available.
0,0
-2,0
25 75 125 175 225
Object temperature (°C)
Housing TO 18
Applications
? contactless measurement of surface temperatures or IR-Radiation
? temperature measurement of moving objects
? manufacturing temperature control systems
? thermal alarm systems
? consumer, safety- and environmental systems
? absorption measurement for gas analysis (see special data sheet)
? industrial and automotive climate control systems
? medical instruments
Additional products with different filters and packages are also available.
Tables with emissivity of different materials and surfaces are available.
Specifications are subject to change without notice !
HL-Planartechnik GmbH
Hauert 13, 44 227 Dortmund, Tel.: +49 (0) 231/97400, Fax.: +49 (0) 231/974020
Stand: 08.04.02
Internet: http://www.hlplanar.com E-Mail: service@hlplanar.de Design: Zn
)Vm(
egatlov
tuptuO-elipomrehT
TS 118 - 3 / TS 118 - 4
THERMOPILES are used for non-contact surface temperature measuring.
Any object emits infrared radiation. The radiation power is increasing with growing surface
temperatures. Based on this relation, THERMOPILES measure the emitted power and determine the
object’s temperature precisely.
Function Principle
THERMOPILES are based on the Seebeck effect, which is used since a long time for conventional
thermocouples. The application of micromechanics and thin film technology allows the production of
miniaturized and cost effective sensor elements.
absorption area silizium-substraet
(hot junctions) SiNx-membrans (cold junctions)
A multitude of thermojunctions deposited on a silicon substrate is connected in series to form a
THERMOPILE. The hot junctions are thermally insulated from the cold junctions on the substrate by
etching a self-supporting extremely thin membrane. An absorbing layer on the hot junctions transforms
the incoming radiation into heat. A voltage proportional to the radiation is generated by the
thermoelectric effect. The sensors are delivered in TO05 packages. Different housings and filter types
can be selected to find an optimal solution for each application. Chips without housing are available as
well.
Specifications Filter
Parameter Symbol Unit Value Condition
Number of thermojunctions n 100
Material BiSb, NiCr
Active Area AA mm2 0.7 * 0.7
Chip Size AC mm2 2.0 * 2.0
Resistance of Thermopile R k? 50 ± 15 25 °C
TC of resistance TCR % / K -0.03 ± 0.02 +25...+75 °C
Sensitivity of sensor S V / W typical 80 25°C, 500 K, DC
TC of sensitivity TCS % / K -0.52 ± 0.08 +25...+75 °C
Specific detectivity D* cm*Hz1/2 / W 1.5 * 108 500 K, DC
Noise equivalent power NEP nW 0.46 500 K, 1 Hz
Time constant t63 ms 40 ± 10 500 K, 1 Hz
Operation temperature T °C -20 ... +100
Storage temperature T °C -40 ... +100
Reference Resistor
Resistance RNi ? 1000 ± 0.4% 0 °C
TC of resistance TCRNi ppm / K 6178 ± 1% 0 °C...100 °C
Function: R(T) = 1000? + 6,17*T*?, for detailled information see data sheet of reference resistor
HL-Planartechnik GmbH
Hauert 13, 44 227 Dortmund, Tel.: +49 (0) 231/97400, Fax.: +49 (0) 231/974020
Internet: http://www.hlplanar.com E-Mail: service@hlplanar.deThermosensors
TS 118 - 3 / TS 118 - 4
C onnecting Diagram TS118-3 TS118-4
bottom view
O utput Voltage versus Object Temperature
12,0
Conditions:
10,0
Distance from Thermopile to Black
8,0 Body is 5 cm, emissivity equals 1,
surrounding temperature is 25°C
6,0
4,0
Tables with emissitvity of different
2,0 materials and surface are available.
0,0
-2,0
25 75 125 175 225
Object temperature (°C)
Housing TO 18
Applications
? contactless measurement of surface temperatures or IR-Radiation
? temperature measurement of moving objects
? manufacturing temperature control systems
? thermal alarm systems
? consumer, safety- and environmental systems
? absorption measurement for gas analysis (see special data sheet)
? industrial and automotive climate control systems
? medical instruments
Additional products with different filters and packages are also available.
Tables with emissivity of different materials and surfaces are available.
Specifications are subject to change without notice !
HL-Planartechnik GmbH
Hauert 13, 44 227 Dortmund, Tel.: +49 (0) 231/97400, Fax.: +49 (0) 231/974020
Stand: 08.04.02
Internet: http://www.hlplanar.com E-Mail: service@hlplanar.de Design: Zn
)Vm(
egatlov
tuptuO-elipomrehT
AIGC您好，TS118-4eng紅外溫度傳感器是一款專業的紅外線測溫設備，它主要用于非接觸式測量物體表面的溫度。"TS118"可能是這款產品的型號標識，"4eng"可能表示該傳感器有四個獨立的測量通道，可以同時檢測多個目標的溫度。"紅外"意味著它是通過分析紅外輻射來確定溫度，這在許多工業環境、實驗室或家用電器中都非常常見，如空調、烤箱或者電力設備的監控。如果您有關于這款傳感器的操作、安裝或技術參數的問題，請隨時告訴我，我會盡力提供幫助。
