KMY Z20S磁阻傳感器
聲明：您必須遵守我們的協議，如果您下載了該資源行為將被視為對《電天下賬號管理規范》全部內容的認可，本網站資源來自原創，僅供用于學習和交流，請勿用于商業用途。如有侵權、不妥之處，請舉報本資源，我們將及時審核處理！
KMY Z20S磁阻傳感器
KMY Z20S磁阻傳感器
文本預覽
Magnetic Field Sensors
KMY 20 S / KMZ 20 S
Function principle
Magnetoresistive materials can change their resistivity in an external magnetic field. The
variation of the resistivity is determined by the rotation of magnetisation with respect to the
direction of the current flow. Permalloy (Ni Fe ) is commercially used as
81 19
magnetoresistive material. The relative change of resistivity is 2-3 % for this material. The
high sensitive and small size magnetoresistive sensors consist of chip 174B covered with
thin film permalloy stripes. These stripes form a Wheatstone bridge, whose output voltage
is proportional to the magnetic field component H .
y
Characteristic
The bridge imbalance is a value for the magnetic field component H in the plane of the
y
chip. It is of advantage to apply an auxiliary field H = 3 kA/m which avoids flipping of the
x
magnetisation of the stripes caused by disturbing magnetic fields. A perpendicular field H
x
is necessary to stabilize sensor operation. This can be done by using a small permanent
magnet. See information for KMZ 20 M1 / KMY 20 M. Magnetic fields vertical to the chip
surface have no influence on the output voltage.
Sensors in thin film technology
HL-Planartechnik GmbH
Hauert 13, D - 44 227 Dortmund, Tel.: +49 (0) 231/97400, Fax.: +49 (0) 231/974020
Internet: http://www.hlplanar.com E-Mail: service@hlplanar.deMagnetic Field Sensors
KMY 20 S / KMZ 20 S
Technical data
Absolute maximum ratings Applications
Parameter Symbol Unit Value - detection of weak magnetic fields,
e.g. earth magnetic field
Supply voltage VB V 12 - contactless mechanical switch
Total power dissipation Pto mW 120 - displacement measurement with
high resolution
Operating temperature range Tamb °C -40 ... + 125
- revolution speed detection
Storage temperature range Tstg °C -65 ... +150
on ferromagnetic gear wheels
- contactless angle measurement
Electrical characteristics (T = 25°C, H = 3 kA/m) - galvanically seperated current
amb x
measurement
Parameter Symbol Unit Value
U [mV/V]
0
Bridge resistance RB kOhm 1.4 .. 2.0
8
H x = 3 kA/m
Open circuit sensitivity SV (mV/V)/(kA/m) 4.7 ± 1.0
Output voltage range ?VO /VB mV/V 20.0 ± 4.0 6
Hysteresis of output voltage VO H/VB μV/V ≤ 50 4 H x = 1 kA/m
Offset voltage VOFF /VB mV/V ≤ ± 1.0
2
Temperature coefficients ( - 25 °C < T < 125 °C) -4 -3 -2 -1 1 2 3 4
amb H y [kA/m]
of -2
Parameter Symbol Unit Value
-4
Bridge resistance TCBR %/K 0.30 ± 0.05 -6
Open circuit sensitivity -8
(VB = const) TCSV %/K -0.30 ± 0.05
Offset voltage
(IB = const) TCT OC FS FI (μV/V% )/ /KK 0.00
≤
±
±
0 3. 05 O fou rt p du ift f ev ro el nta t g se ta v be ilr izs iu ns g f mie ald g nco em ticp fo ien le dn st HH xy
Housing of KMY 20: SOT-223-S Housing of KMZ 20: E-Line 4-Pin
SOT-223-S
1: +V0 2: -V0 V0: Output voltage
3: +VΒ 4: -VB VB: Supply voltage metric dimensions
E-Line 4-Pin
1: +V0 3: -V0 V0: Output voltage
2: -VB 4: +VB VB: Supply voltage
Sensors in thin film technology
HL-Planartechnik GmbH
Hauert 13, D - 44 227 Dortmund, Tel.: +49 (0) 231/97400, Fax.: +49 (0) 231/974020
7.12.01
Internet: http://www.hlplanar.com E-Mail: service@hlplanar.de
KMY 20 S / KMZ 20 S
Function principle
Magnetoresistive materials can change their resistivity in an external magnetic field. The
variation of the resistivity is determined by the rotation of magnetisation with respect to the
direction of the current flow. Permalloy (Ni Fe ) is commercially used as
81 19
magnetoresistive material. The relative change of resistivity is 2-3 % for this material. The
high sensitive and small size magnetoresistive sensors consist of chip 174B covered with
thin film permalloy stripes. These stripes form a Wheatstone bridge, whose output voltage
is proportional to the magnetic field component H .
y
Characteristic
The bridge imbalance is a value for the magnetic field component H in the plane of the
y
chip. It is of advantage to apply an auxiliary field H = 3 kA/m which avoids flipping of the
x
magnetisation of the stripes caused by disturbing magnetic fields. A perpendicular field H
x
is necessary to stabilize sensor operation. This can be done by using a small permanent
magnet. See information for KMZ 20 M1 / KMY 20 M. Magnetic fields vertical to the chip
surface have no influence on the output voltage.
Sensors in thin film technology
HL-Planartechnik GmbH
Hauert 13, D - 44 227 Dortmund, Tel.: +49 (0) 231/97400, Fax.: +49 (0) 231/974020
Internet: http://www.hlplanar.com E-Mail: service@hlplanar.deMagnetic Field Sensors
KMY 20 S / KMZ 20 S
Technical data
Absolute maximum ratings Applications
Parameter Symbol Unit Value - detection of weak magnetic fields,
e.g. earth magnetic field
Supply voltage VB V 12 - contactless mechanical switch
Total power dissipation Pto mW 120 - displacement measurement with
high resolution
Operating temperature range Tamb °C -40 ... + 125
- revolution speed detection
Storage temperature range Tstg °C -65 ... +150
on ferromagnetic gear wheels
- contactless angle measurement
Electrical characteristics (T = 25°C, H = 3 kA/m) - galvanically seperated current
amb x
measurement
Parameter Symbol Unit Value
U [mV/V]
0
Bridge resistance RB kOhm 1.4 .. 2.0
8
H x = 3 kA/m
Open circuit sensitivity SV (mV/V)/(kA/m) 4.7 ± 1.0
Output voltage range ?VO /VB mV/V 20.0 ± 4.0 6
Hysteresis of output voltage VO H/VB μV/V ≤ 50 4 H x = 1 kA/m
Offset voltage VOFF /VB mV/V ≤ ± 1.0
2
Temperature coefficients ( - 25 °C < T < 125 °C) -4 -3 -2 -1 1 2 3 4
amb H y [kA/m]
of -2
Parameter Symbol Unit Value
-4
Bridge resistance TCBR %/K 0.30 ± 0.05 -6
Open circuit sensitivity -8
(VB = const) TCSV %/K -0.30 ± 0.05
Offset voltage
(IB = const) TCT OC FS FI (μV/V% )/ /KK 0.00
≤
±
±
0 3. 05 O fou rt p du ift f ev ro el nta t g se ta v be ilr izs iu ns g f mie ald g nco em ticp fo ien le dn st HH xy
Housing of KMY 20: SOT-223-S Housing of KMZ 20: E-Line 4-Pin
SOT-223-S
1: +V0 2: -V0 V0: Output voltage
3: +VΒ 4: -VB VB: Supply voltage metric dimensions
E-Line 4-Pin
1: +V0 3: -V0 V0: Output voltage
2: -VB 4: +VB VB: Supply voltage
Sensors in thin film technology
HL-Planartechnik GmbH
Hauert 13, D - 44 227 Dortmund, Tel.: +49 (0) 231/97400, Fax.: +49 (0) 231/974020
7.12.01
Internet: http://www.hlplanar.com E-Mail: service@hlplanar.de
AIGC您好！KMY Z20S是一款專為電氣行業設計的磁阻傳感器（Magnetic Resistance Sensor），它屬于一種非接觸式位移傳感器類型，利用霍爾效應或磁敏電阻材料對磁場變化的敏感特性來檢測物體在磁場中的位置、移動距離或者磁場強度等參數。具體來說，Z20S可能是該型號傳感器的產品系列名，其中"Z"和"20"可能代表產品系列號或技術規格特征，而"S"則可能是"Sensor"（傳感器）的縮寫。
此款磁阻傳感器適用于廣泛的應用場景，如電機控制、自動化設備、家用電器、工業機器人以及其他需要精確測量位置或運動狀態的場合。通過集成到控制系統中，能夠?qū)崿F(xiàn)對被測物體位置的實時監控和反饋，從而提高設備的精度、穩定性和工作效率。如果您有關于KMY Z20S磁阻傳感器的具體應用、安裝方法、技術參數或選型疑問，請?jiān)敿?xì)告知，我們將為您提供更專業的幫助。
